Originally Posted by PStov98TJ
Congrats on the job man! That's every jeepers dream to work for a company like that. But if you wouldn't mind, could you post up some more pics of your rear 4-link? And just wondering, where did you buy/order that Axial from?
the 4 link rear with a 9" stretch. I'll try and post up a few in a day or so for ya
Poison Spyder sells Axials now, you cna get them in many hobby shops too
While working my new found job at Poison Spyder here in CA, New products are on the horizon! Unfortunatly I can't Show you guys all of the awesome things we are working on untill they are released! haha but fortunatly for you the DeFender Standard Inner Fenders were released so I have some shots of the install.
The cool thing about it is that I already Had the DeFenders installed. I didn't have to remove them to install the new Inner Fenders. I unbolted all the factory hardware and brackets off the stock fenderwells (or what was left of them) and simply slid them out from the bottom side of the fender. They slid right around the coilover mount and right around the tires.
Once the stock inner fenders were taken out the 3 Piece set simply bolts together. I started loosle with the top piece that bolts to the DeFender, then the backing plate, to give me room around the edgesd for the piece that follows the contor of the shocks and springs. They simply bolt together like legos. pretty cool. I did however have to rearange some of the components to make better fitments. The Hardware Kit does come with a few extra bolts to aid in a clean look for drilling holes and attaching factory components to the area of your choice depending on what you are running. I moved my fuel vapor can to the driver slant side of the innerfender piece. i just removed the factory bracket that holds it inplace and bolted straigh to the fenderwell. used rubber gromits so it wouldn't rattle either! :2thumbsup: Moved the Washer fluid bottle over to the end as you cna see too. Im running an Banks cold ait intake. the stock air box will not fit with this set up without heave mods
i used some aluminum "L" brackets to fasten my intake to the fender. using hoseclamps and some rubber bushings i was able to relocate my resi for the coilovers to the under-tops (oximoron?) for a cleaner look
I'll get pictures up soon of the pass side and the brackets i used