3D drawings of sliders. Anything im missing? - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > General Jeep Discussions > Builders Corner

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 02-08-2012, 10:07 PM   #1
Rock-Rubber

WF Supporting Member
 
GoldenSahara00's Avatar
 
Join Date: Aug 2010
Location: SCPA
Posts: 16,667
3D drawings of sliders. Anything im missing?

Well I was bored. Kinda waiting for nice weather to do my welding and stuff because I hate rust. And stuff ends up getting it in the winter. It happened with my stinger I built over Christmas and it was a pain to keep clean til I got some paint on it. But I may actually extend the bottom the whole way not just the one section and cut the pieces out for the frame pcks to fit into. Then run a gusseted bracket down to the stock holes and bolts from stock side steps. Along with the mounts on the side. I think I am gona put a backing plate inside the tub as well. Dimensions are top 52 1/8 bottom 46. The front edge extends 3 1/8 inch and rear is 2 3/4. Holes are spaced 7 inches apart all across. Bottom is 7 1/2 on the long section and 3 1/2 short. The length of the long portion is 16 1/2. I can show dimension on the picture I needed. I will also be adding the tube step portion. Probably 1.25 or 1.5 DOM tubing. With 2 supports. I could use some info on bends etc if anyone has it.
Attached Thumbnails
Click image for larger version

Name:	image-3266188333.jpg
Views:	67
Size:	110.5 KB
ID:	96006   Click image for larger version

Name:	image-738677733.jpg
Views:	68
Size:	100.2 KB
ID:	96007  


__________________
Ryan - A good eye, a light foot, and a smart rig.
Bolt-ons are boring
AMERICAN JEEPER
My Build - http://www.wranglerforum.com/f118/pr...a00-74622.html
Rausch Creek Trip: 2014 Trip Coming Soon
GoldenSahara00 is offline   Quote Quick Reply
Old 02-10-2012, 10:30 PM   #2
Rock-Rubber

WF Supporting Member
 
GoldenSahara00's Avatar
 
Join Date: Aug 2010
Location: SCPA
Posts: 16,667
Tube fenders.
Attached Thumbnails
Click image for larger version

Name:	image-3746217769.jpg
Views:	61
Size:	128.9 KB
ID:	96458  

__________________
Ryan - A good eye, a light foot, and a smart rig.
Bolt-ons are boring
AMERICAN JEEPER
My Build - http://www.wranglerforum.com/f118/pr...a00-74622.html
Rausch Creek Trip: 2014 Trip Coming Soon
GoldenSahara00 is offline   Quote Quick Reply
Old 02-15-2012, 05:16 AM   #3
Jeeper
 
TheDoc's Avatar
 
Join Date: Mar 2011
Location: At the moment Sohar, Oman
Posts: 199
It will make you twice as happy to make your own Tube fenders look good.

I would go with 1.25" od and run a 6" radius on your bends. only have them out from your angle iron around 3" i guess. But go with sched 40 or so tubing.

Thats what I would use, but others who have them will know better.
TheDoc is offline   Quote Quick Reply
Old 02-15-2012, 05:26 AM   #4
Commercial Member

WF Supporting Member
 
kfdjason7620's Avatar
 
Join Date: Apr 2011
Location: Kenly, NC
Posts: 3,962
Looks good!
kfdjason7620 is offline   Quote Quick Reply
Old 02-15-2012, 09:31 PM   #5
Jeeper
 
Geno's Avatar
 
Join Date: Jan 2011
Location: Central California
Posts: 492
Do you have any dimensions with those fenders?
Geno is offline   Quote Quick Reply
Old 02-15-2012, 11:12 PM   #6
Jeeper
 
jerryj's Avatar
 
Join Date: May 2009
Location: Idyllwild
Posts: 670
I made step bars on my sliders I used 1.5 tubing and bent them on a 35 degree angle and cut them 34" long and made the step 4" wide to match the fender flares Im putting on the rear sprayed them black and put on a little grip tape where u step, looks good.

jerryj is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Warning - Rough County Winch Mount Missing Hardware Barmanvarn General Jeep Discussion 2 01-02-2012 06:44 PM
Rock sliders jrmiller TJ General Discussion Forum 16 11-16-2011 09:56 AM
New 2 Door Sahara with DUalTop missing soft top pieces? blunted JK General Discussion Forum 3 04-26-2011 07:57 AM
high idle / missing... helppppp plz scgeek12 TJ General Discussion Forum 4 03-10-2011 12:58 PM
1983-2006 Jeep CJ7, YJ, TJ Rock Sliders 4WheelingPlus Classifieds Archive 0 12-16-2008 05:32 PM



» Featured Product

All times are GMT -5. The time now is 02:05 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC