pasteris by the time i fabbed and shipped them you can prolly get em done cheaper at a local fab shop. I used my old bestop cloth doors, removed the clothed and just fastened the aluminnum sheet to it. about 4 hours labor and 100 bucks in material including the fastners.
all i need is the frame from the bestop fabric doors. i can make the skins pretty cheap for what they are. its about 150 for supplies and about 6hours to cut, roll the bead, weld the fasteners and mock it all up. if i had to do it over again i would move and add a couple fasteners on each door. i need to get a bead roller that fold the out edge over at a slight angle... currently mine are filed smooth. PM me if your serious and want a real quote.
jerry go with a 9inch!! i wish i did, then i could put a real truss back there. were headed out with fourwheeler mag this thursday doing our barstow to laughlin run. gonna take it easy and check out the sites on the way out. then saturday haul ass home from laughlin. let me know if you wanna come. a few prerunners and go fast jeeps are coming. also a slow group with a couple unimogs and not so fast jeeps.