I have been thinking in cutting fenders Looking for Ideas ,examples ,Pics.

Forgot to mention PA tire coverage law! which sucks Looked at Gen Rite cool stuff .to much moneyfor me

build your own copys

mine

slightly different angle

Go Highline....


Mine was a home modification that the previous owner did.

There is a kit by AEV:
AEV Kit

Here is a link to how someone did their own:
Highline hood and fenders

Hope this helps, keeps you in the graces of the law
later,
Bill

Here is some progress,

try smittybilt they have genright copys . they call them xrc fenders. like 299 a pair same thing almost

started on fenders today.(weld, grind,bondo,prime and paint ) HMMM what color

KEEP forgetting to up photo,these are at 6" wide now ,probably end up 5.5"to 5.75" wide.

Dose anybody make a round headlight conversion for a YJ?????????????

I hope its not going to look cartoonish.



desert tan

olive drab

Hugger Orange

Here's it tacked up , not sure how to cut front in yet. going to think about this some more. not sure if I like it ,after cuting and welding to my perfectly good fender.
sure if wide

Are you required in your state to have tire coverage?

I had mine like this for a long time.

yes ,and i live next door to the policeI cant get away with anything

That sucks. I feel for ya man.

I may tapper the back.from the roll down to the rocker.maybe the the front will get a tube welded in instead of the origanal piece

Ya, that might work. When I did mine I had thought of running a tube under the lip all the way around but I ended up going a totally different way.

Just got back from picking up more material
2x4 sq tubing 14' for 20 bucks

Did you make quick disconnect fenders?

I went with a different paint scheme and put on some bushwacker cutout flares.

I should move this to Builders Corner,How do I do that?

You ask a moderator to do that.

4Point, Tiny Terror, Ccain, 4Jeepn, Scout,....wait...not Scout. He doesn't know how.

Went for a ride last nite,4WD hardware.its only 25miles from me. That place has grown so big scince I built my CJ-5.Like going to Jeep heavengot my transfercase lowering kit

Oh, you've got to be kidding. 25 miles?!?!? I'm so jealous.

starting over

cut the front of fenders off ,Ordered a bender.going 5" wide flat tube fenders.

Heres what I did : Went to tractor supply got there 7" wide trailer fenders 2 for front a side 3 for rear. and a lot of cut off disc. Fitted a 3/4 conduit for the rad will use 1" tubing when I find a good deal on it.This for you guys if you want a cheap alt to high dollar steel flares. I think they are going to be Pretty Cool!

hmm u know what might make it look a little better. would be to have the tube as the out side edge of the fender, and then taper it back to the body. if that's legal not sure if that's legal just my two cents

Yea ,I may do that after I get my bender.this just a preformed item I saw ,which I thought would work for cheap alt.trying to keep the Cops off my but.@ 20 bucks a fender ,why not

Not bad at all. I think it would look better as mophious said though with the tube as the edge of the fender all the way around.

Yea, gonna need a new right angle grinder.MORE cut off wheels