Need some ideas from you fabricators
So i fabbed up a front cage set up for my jeep. Everything fit nice under the hard top and worked out just fine. THEN... i put the soft top on after the weather started getting better.... the C clamp on the door surrounds doesnt line up with the cage bar. Th bar is about a 1/2" higher then the surround on the back side C clamp and about 3/4" higher on the front clamp.
Rather then take the cage out and have to cut,grind and re weld and have it look like a frankin cage i was thinking about cutting the top part of the clamps off and making an L bracket to bolt to the surround to lift the top mount to clear the cage bar.
The only two options i see are to lower the cage... PIA
OR raise the clamps for the surrounds.
I will take some pics today as soon as the weather lets up enough to pull back the top.
99TJ S 4.0 5speed DPG ultimate kit. 3" OME coils with OME LT nitro shocks 1"MML JKS sway bar links and discos JKS F/R ajust trackbars custom made cage with beltfed HK21 mount 32x11.5x15