03-24-2014, 12:57 PM
Join Date: Nov 2012
Triple Nickle Build
I have decided to showcase a little bit of my build so far. I started out with a very capable TJ with:
HP D30 W/ RCV
Barnes 2" Transfercase Skid
And all the other normal stuff
I am going to be putting D60's front and rear, 3 link the front(with track bar) and double triangulating the rear. At this time I will be pushing the front forward prob 3-4" and the rear 7"+. Running 39.5" Iroks.
I will be doing a custom long/mid arm using Metal Cloak Duroflex joints. I really like the fact they are rubber, so if the do wear rebuilding is a breeze. Not to mention they have 34 degrees of misalignment.
Two major Items I haven't decided on yet are:
Air shocks or ORI
Obviously the ORI's are a no brainer, its just a funds decision. Since they are 2x the cost. Then I need to decide what I am going to do for a fuel tank. Get a custom cell made, or do a partially under the jeep and partially inside with a cover.
I will try to update this as the build progresses. Yesterday I completed grinding all the mounts off. So I am ready to start the fabbing!