All our Different Weld Washers! - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > Special Deals for Members > Vendor Spotlight! Great Deals for Members.

Reply
 
Thread Tools
Old 06-20-2013, 11:41 PM   #1
Sponsoring Vendor
 
Dan Fredrickson's Avatar
 
Join Date: May 2013
Location: Loomis, CA
Posts: 1,099
Arrow All our Different Weld Washers!

When we first came out with our Weld Washers 8 years ago they had been made by 20 other companies for years. They were great as a preventative measure when first building a vehicle because they are 7/32" thick but were not as good for repair's. The reinforce a good hole with more than 3/16" of additional steel and come in 1/2", 9/16", 5/8", & 3/4" to cover the bases for you.



Then 3 years ago we added the Fixit Weld Washers. They were primarily for repairing a hole that was already bad from use. They create a clean new bolt hole in 1/2", 9/16", 5/8", or 3/4" and all are 3/8" thick so you don't have to worry about what you fix!



Now just 2 weeks ago we came up with something else along these lines that in some ways is even cooler! Our Threaded Weld Washers. These are used to add something to your chassis in as easy a way you can that is strong enough to stand up to years of use and abuse. They are available for a 5/16", 3/8", & 1/2" thread bolts and require a 3/4" hole to be drilled for mounting so they can be added for anything down to a 1 1/4" Tube and of course any plate or sheet stock.



I seriously see these as something that should be on pretty much any fabricators shelf because there are so many possible uses for them. I am not joking here, these simply make too much sense...

These are all found in our Reinforcements section where we have a whole bunch of things like these

Reinforcement Plates - RuffStuff Specialties
__________________
Dan Fredrickson www.ruffstuffspecialties.com
......"The NEW Industry Standard"
Tech/Sales 916.600.1945
You can SAY anything, its what you DO that matters!
The Official Repair Station of KOH!
Dan Fredrickson is offline   Quote
Old 06-22-2013, 04:18 PM   #2
Sponsoring Vendor
 
Dan Fredrickson's Avatar
 
Join Date: May 2013
Location: Loomis, CA
Posts: 1,099
The right tools to get you where you want to go, and back
__________________
Dan Fredrickson www.ruffstuffspecialties.com
......"The NEW Industry Standard"
Tech/Sales 916.600.1945
You can SAY anything, its what you DO that matters!
The Official Repair Station of KOH!
Dan Fredrickson is offline   Quote
Old 06-26-2013, 11:44 PM   #3
Sponsoring Vendor
 
Dan Fredrickson's Avatar
 
Join Date: May 2013
Location: Loomis, CA
Posts: 1,099
These just make sense!
__________________
Dan Fredrickson www.ruffstuffspecialties.com
......"The NEW Industry Standard"
Tech/Sales 916.600.1945
You can SAY anything, its what you DO that matters!
The Official Repair Station of KOH!
Dan Fredrickson is offline   Quote
Old 07-01-2013, 11:42 AM   #4
Sponsoring Vendor
 
Dan Fredrickson's Avatar
 
Join Date: May 2013
Location: Loomis, CA
Posts: 1,099
Every tool box should have a double handfull of these!
__________________
Dan Fredrickson www.ruffstuffspecialties.com
......"The NEW Industry Standard"
Tech/Sales 916.600.1945
You can SAY anything, its what you DO that matters!
The Official Repair Station of KOH!
Dan Fredrickson is offline   Quote
Old 07-18-2013, 01:30 PM   #5
Sponsoring Vendor
 
Dan Fredrickson's Avatar
 
Join Date: May 2013
Location: Loomis, CA
Posts: 1,099
Not something you will find at your local hardware store!
__________________
Dan Fredrickson www.ruffstuffspecialties.com
......"The NEW Industry Standard"
Tech/Sales 916.600.1945
You can SAY anything, its what you DO that matters!
The Official Repair Station of KOH!
Dan Fredrickson is offline   Quote
Old 08-17-2013, 12:27 PM   #6
Sponsoring Vendor
 
Dan Fredrickson's Avatar
 
Join Date: May 2013
Location: Loomis, CA
Posts: 1,099
These are really one of the most useful things we make, check them out!
__________________
Dan Fredrickson www.ruffstuffspecialties.com
......"The NEW Industry Standard"
Tech/Sales 916.600.1945
You can SAY anything, its what you DO that matters!
The Official Repair Station of KOH!
Dan Fredrickson is offline   Quote
Old 10-08-2013, 09:56 AM   #7
Sponsoring Vendor
 
Dan Fredrickson's Avatar
 
Join Date: May 2013
Location: Loomis, CA
Posts: 1,099
We always have the wheeler in mind
__________________
Dan Fredrickson www.ruffstuffspecialties.com
......"The NEW Industry Standard"
Tech/Sales 916.600.1945
You can SAY anything, its what you DO that matters!
The Official Repair Station of KOH!
Dan Fredrickson is offline   Quote
Old 11-07-2013, 01:03 PM   #8
Sponsoring Vendor
 
Dan Fredrickson's Avatar
 
Join Date: May 2013
Location: Loomis, CA
Posts: 1,099
Lightbulb All our Different Weld Washers!

A real time saver !!!
__________________
Dan Fredrickson www.ruffstuffspecialties.com
......"The NEW Industry Standard"
Tech/Sales 916.600.1945
You can SAY anything, its what you DO that matters!
The Official Repair Station of KOH!
Dan Fredrickson is offline   Quote
Old 12-05-2013, 01:08 PM   #9
Sponsoring Vendor
 
Dan Fredrickson's Avatar
 
Join Date: May 2013
Location: Loomis, CA
Posts: 1,099
All our Different Weld Washers!

The right way
__________________
Dan Fredrickson www.ruffstuffspecialties.com
......"The NEW Industry Standard"
Tech/Sales 916.600.1945
You can SAY anything, its what you DO that matters!
The Official Repair Station of KOH!
Dan Fredrickson is offline   Quote
Old 01-04-2014, 01:16 PM   #10
Sponsoring Vendor
 
Dan Fredrickson's Avatar
 
Join Date: May 2013
Location: Loomis, CA
Posts: 1,099
When you are dealing with a 20+ year old rig you have 50 uses for these. When dealing with a brand new rig that you don't want to start acting like its 20 years old you have even more
__________________
Dan Fredrickson www.ruffstuffspecialties.com
......"The NEW Industry Standard"
Tech/Sales 916.600.1945
You can SAY anything, its what you DO that matters!
The Official Repair Station of KOH!
Dan Fredrickson is offline   Quote
Old 01-04-2014, 01:18 PM   #11
Sponsoring Vendor
 
Dan Fredrickson's Avatar
 
Join Date: May 2013
Location: Loomis, CA
Posts: 1,099
Whether an old rig being renewed or a brand new rig being made bullet proof, these have a place in your toolbox
__________________
Dan Fredrickson www.ruffstuffspecialties.com
......"The NEW Industry Standard"
Tech/Sales 916.600.1945
You can SAY anything, its what you DO that matters!
The Official Repair Station of KOH!
Dan Fredrickson is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 04:02 PM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC