Poison Spyder JK Body Armor is a recommended install in conjunction with our Rocker Knockers. Body Armor may also be installed by itself, or along with other manufacturer's rock sliders, including the OE Rubicon Rails.
Poison Spyder JK Body Armor is recommended equipment for any JK venturing into off road situations where body damage is eminent. JK Body Armor protects the thin factory sheetmetal with rugged, precision-fit 3/16" plate steel or aluminum. Used by itself, JK Body Armor hugs the Jeep's body contours to provide protection with no loss of ground clearance. Used with the factory Rubicon rocker rails, the JK Body Armor helps prevent trail damage that can be caused by rocks pushing the factory rocker rails up into the body. And used with Poison Spyder's JK Rocker Knockers™, the JK Body Armor provides one more line of defense for your JK, in the most complete, strongest, best looking package of rocker panel protection gear available for the JK.
JK Body Armor is manufactured from either 3/16" high pressure steel plate or 3/16" 6061-T6 aluminum plate. Steel is preferred where the JK Body Armor will be installed by itself, without Rocker Knockers™ or other rocker panel protection. Aluminum is recommended where Rocker Knockers, the stock Rubicon rocker rails or other rocker panel protection will also be used. The aluminum pieces are much lighter weight (27 lbs. lighter for the 4-door versions), yet still provide excellent load distribution characteristics when used as a secondary barrier in conjunction with external rocker rails. Both steel and aluminum versions may be painted or powdercoated prior to installation, but only the aluminum ones may be installed raw without any protective coating. They may also be polished or clear-coated at the installer's discretion. Both steel and aluminum parts are CNC-laser cut and precision brake-formed for a precise fit to the unique contours of the JK body. Bolt holes are countersunk, and stainless steel flat head cap screws are supplied for a clean, flush-surface installation. Drilling of the body is required for installation.
JK Body Armor is available bare (unfinished) or with a durable black powder coat finish. When selecting the powder coat option, please allow an extra 5-10 business days for delivery. Poison Spyder offers a precisely-cut rubber liner to install between the Body Armor and the factory sheetmetal. Although the Body Armor can be mounted without the liner, this additional component adds protection from debris collecting between the Body Armor while protecting your Jeep's factory sheetmetal and paint. The rubber liner is cut to match the lines of the Body Armor perfectly - no cutting or trimming is required. Liners are sold separately and do not automatically come with the Body Armor kits.
Click Here for 2-Door JK Body Armor in Steel
Click Here for 2-Door JK Body Armor in Aluminum
Click Here for 2-Door Rubber Body Armor Liners
Click Here for 4-Door JK Body Armor in Steel
Click Here for 4-Door JK Body Armor in Aluminum
Click Here for 4-Door Rubber Body Armor Liners