Jeep Wrangler Forum banner

Help please ANZO 861096 lights

2K views 3 replies 2 participants last post by  OCB 
#1 ·
I got a set of ANZO HID 6" lights Part #861096, well this old man can't figure it out?

This is what was in the box for install

View attachment Anzo Lights03282015.pdf

This is the wiring harness that came with it

Wire Art Font Graffiti Calligraphy


I have searched for a install manual but no luck yet??
 
See less See more
2
#3 ·
-short red goes to battery. remove fuse while installing. -long red goes to another 12v power source depending on how you want the lights to work, but can also be straight to battery. -the 2 longer wires in the black vinyl sheaths go to the light housings. -the 2 remaining black leads go to a ground. one is the very short lead coming from the relay, the other one comes from the connector that goes switch. -your switch is that pod looking thing so the instructions are wrong in saying a switch is not included.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top