Ok today I received my optilux fog light bulbs. When I installed them on my 07 wrangler for some reason when I cut the fog lights on the cut on and off again every time I flip the switch kinda like their flickering. Any one ever had a prob like this? Any help fixing this prob would be great. Thanks in advance.
flickering on startup followed by no light is caused by low power.. check all your connections, make sure they are tight and use some dielectric grease. if this does not solve the problem you may need a heavier wiring harness, welcome to the form
I do appreciate it. I thought about the grease last night but had already started putting them in when I realized I didn't have any. I believe that may be the problem as well. I will check it out shortly.