Kansas FS: Front 14 Bolt housing with Artec truss - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > Buy, sell, trade > Classifieds Archive

Join Wrangler Forum Today

Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 03-31-2013, 07:44 PM
Thread Starter
Join Date: Oct 2005
Location: Wichita, KS
Posts: 6,766
MR.CLIFFORD is on a distinguished road
FS: Front 14 Bolt housing with Artec truss

This front axle housing was built by John Sumner. He did all the machine work to the housing to make it steer. I added the Artec Ford Dana 60 truss work myself. I had this axle under my rig but it has not seen one mile. Here is a run down.

14 Bolt housing built by the legend John Sumner. The center section has been shaved. The diff cover matches the shave as well. All that work has been done by John.

The inner C's are stock Chevy. King pins are installed. There is no gear set in the housing but everything is there to make it happen. The housing is 69.375" wide WMS-WMS. Most of the truss work has been final welded but still needs a few areas final welded. The link brackets are only tacked in place so you can easily fit this under your rig.

This is set up for the PSC dual ended ram. The brackets are final welded in place and will need that ram to work. The housing is drilled for an ARB air line. If you do not wish to run an ARB you can easily plug it.

This axle is ready for you to build to your specs. You can pretty much use any parts you want and build it the way you want it. If you are interested I'd be happy to build this axle however you prefer. You can put together a parts list and I will finish it out for you.

This axle has gone back to John to verify that it is straight after having welded the truss work and he gave it a big thumbs up.

This axle is located in Wichita, KS. You are more than welcome to swing by and pick it up. I can truck freight to your fork lift or we can stop it at a dock and you can pick it up there. If you need a freight quote please let me know your zip code and I will do all the work to get it to you.

Asking $2450.00 for the axle as is. Built prices will vary depending on your parts list. If you prefer to contact me to ask questions you can always call the shop at 316.337.5311 or email me at Andy@trailworthyfab.com.

I accept all forms of payment. You can pay via credit card or PayPal. I also accept cash or check but will only ship after payment has cleared. My personal PayPal address is mr.clifford@thedoubleduke.com

Pics from when I got it.

Pics in my build process.

Pics under my rig.

Current pics. Needs a fresh coat of paint. I tossed some paint at it to keep it from rusting.

MR.CLIFFORD is offline  

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -5. The time now is 05:13 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC
« Back

Enter your email address:

Delivered by FeedBurner