FS: Pair of .500 DOM lower control arms + pair .375 DOM controls (KS) - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > Buy, sell, trade > Classifieds Archive

Join Wrangler Forum Today


 
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 12-27-2007, 03:08 PM   #1
WINNAR!!!!!!
 
MR.CLIFFORD's Avatar
 
Join Date: Nov 2005
Location: THE PROVING GROUNDS
Posts: 6,607
FS: Pair of .500 DOM lower control arms + pair .375 DOM controls (KS)

I have a set of lower control arms that are 2" .500(1/2") DOM drilled and tapped for 1.25" Johnny Joints. These are completely beefy, they have wrench flats, and the ends are chamfered. I had them built to match my front control arms. They are 33" long. Each have a left hand and right hand end so adjusting length can be done on the vehicle without dropping a bolt.

The uppers are 1.75" .375(3/8") walled DOM drilled and tapped for 1.25" Johnny Joints. They are all complete overkill with the same treatment as the lowers. They are 34" long.

I'm selling all 4 control arms for $500 plus shipping to your door.

MR.CLIFFORD is online now   Quick Reply
Old 12-27-2007, 04:06 PM   #2
WINNAR!!!!!!
 
MR.CLIFFORD's Avatar
 
Join Date: Nov 2005
Location: THE PROVING GROUNDS
Posts: 6,607
Pics






MR.CLIFFORD is online now   Quick Reply
Old 12-27-2007, 04:56 PM   #3
Member
 
Join Date: May 2007
Location: where my hat is
Posts: 1,489
nice monitor
Smeghead is offline   Quick Reply
Old 12-27-2007, 05:37 PM   #4
WINNAR!!!!!!
 
MR.CLIFFORD's Avatar
 
Join Date: Nov 2005
Location: THE PROVING GROUNDS
Posts: 6,607
I think I'm going to pick up another one tonight.
MR.CLIFFORD is online now   Quick Reply
Old 12-28-2007, 09:11 AM   #5
WINNAR!!!!!!
 
MR.CLIFFORD's Avatar
 
Join Date: Nov 2005
Location: THE PROVING GROUNDS
Posts: 6,607
I've had quite a bit of questions about the length of these arms so I thought I would give an update to correct the confusion.

The length listed is the body length of each control arm. With the jamb nuts installed on each end and the length to the bolt hole you add ~5" of length to each body measurement. So the lower control arms shortest possible length is 38" bolt hole to bolt hole. That still leaves 2.5" worth of JJ stuffed inside the control arm so there is plenty of adjustability.
MR.CLIFFORD is online now   Quick Reply
 

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
control arms mrbigjeep TJ General Discussion Forum 8 08-23-2010 11:19 AM
Installing lower control arms. Help Triple88a TJ Tech Forum 4 09-30-2007 09:23 PM
Lower Control Arms kg4kpg TJ Tech Forum 4 09-25-2007 04:41 PM
Adjustable front lower control arms kg4kpg Classifieds Archive 0 09-21-2007 11:05 PM
lower adjustable control arms mrbigjeep TJ Tech Forum 3 05-23-2006 12:44 PM



Download our Mobile App

» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 01:30 PM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC