I am selling the last relay box. I was asked by several forum members to make them a relay box similar to what I made for my Jeeps. I bought some of the components in bulk and had enough to make one additional relay box. This box is made for a 2012-2014 Jeep Jk. Internally the relay box has 4 relays, a fuse block and power/ ground distribution blocks. Included with the box is 10 feet of 6 wire cable (more then enough to get to the a pillar), a 6 wire waterproof connector, and a circuit breaker (80amp or 150 amp, your choice). The relay box lid has a rubber gasket, all lid screws come with an o-ring and all cables entering the box have cable glands.
The fuse block, all relays and all distribution blocks are clearly labeled. To add a light bar or other accessory all you have to do is run a power and ground into the relay box and connect them to the distribution blocks.
The relay box sits right on top of the battery. Between the battery and the relay box there is a circuit breaker (installed on the plastic battery tray). You can quickly disconnect all aftermarket accessories from your electrical system by pressing the button on the side of the circuit breaker. This is useful for those trips to the dealer. They can quickly rule out your aftermarket accessories as your problem.
Installation is extremely simple but I created a set of instructions to eliminate confusion.
I am asking $215 plus actual shipping.