has anyone replaced a wheel hub bearing assembly for a dana 30? - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > General Jeep Discussions > General Jeep Discussion

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 01-18-2012, 09:43 PM   #1
Jeeper
 
beardown's Avatar
 
Join Date: Jun 2009
Posts: 644
has anyone replaced a wheel hub bearing assembly for a dana 30?

i need to do this and have never done it! how tough of a job is this? and any tips for me? thanks

beardown is offline   Quote
Old 01-18-2012, 11:54 PM   #2
Newb
 
Join Date: Jan 2012
Posts: 9
I haven't actually replaced a D30 hub, however, I have done a D30 axle U-joint which is a very similar body of work to what you'll need to do. It wasn't difficult. The following should help: D-30 Axle Shaft Removal - 1

Gunmetal is offline   Quote
Old 01-18-2012, 11:57 PM   #3
Newb
 
Join Date: Jan 2012
Posts: 9
Btw, I posted some detail in a thread on JF which may give you some tips. Documenting my front-end work
Gunmetal is offline   Quote
Old 01-19-2012, 01:57 AM   #4
Jeeper
 
Mitchness's Avatar
 
Join Date: Jan 2011
Location: Spokane, WA
Posts: 1,190
Jack up the front of the Jeep, remove lug nuts and wheel, remove caliper bolts and caliper, remove hub bolts (13mm 12pt), remove hub and axle shaft assembly together. You may need a slide hammer if the hub is rusted to the knuckle, or you can back the hub bolts out part way and bang on 'em with a mallet and a block of wood.

If you need to separate the axle shaft from the hub do so with an impact gun or a breaker bar on the hub nut when the assembly is still on the Jeep.
__________________
Quote:
Originally Posted by wmpiehl
Haha, just don't let Mitch teach you how to wheel, he is really scary
Mitchness is offline   Quote
Old 01-19-2012, 08:30 PM   #5
Newb
 
Join Date: Jan 2012
Posts: 9
You can also use the "bolt trick" referenced in my JF thread, essentially using the steering linkage to press the hub off of the knuckle.
Gunmetal is offline   Quote
Old 01-22-2012, 12:07 PM   #6
Jeeper
 
Join Date: Nov 2008
Location: Pembroke Pines, FL.
Posts: 473

ljrubitm is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hub Bearing Assemblly write up Rawkon General Jeep FAQ/Stickies 2 12-12-2012 03:04 PM
dana 35 bearing caps 4.0l sahara TJ General Discussion Forum 2 05-22-2008 02:23 PM
wheel bearing help rebelBullDawg325 YJ Tech Forum 11 04-12-2007 07:59 PM
Dana 44 rear outer wheel bearings? 04moneypit TJ Tech Forum 3 10-13-2006 09:21 AM
have wheel bearings for dana 44 changed?? jroth TJ General Discussion Forum 2 07-07-2006 11:14 AM



Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 03:24 PM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC