Originally Posted by SnowboarderOx
If you read your manual..... it says the 'side steps' should be removed prior to going off road.
I was a little surprised by that....
Edit: Found it:
OFF-ROAD DRIVING TIPS
Side Step Removal – If Equipped
NOTE: Prior to off-road usage, the side steps should be removed to prevent damage.
1. Remove the two nuts from the bodyside.
2. Remove one bolt from the underside of the vehicle.
3. Remove the side step assembly.
Thank you, but I know how the accessory steps are removed. I have been doing this twice a month when I took the FJ offroad. On the FJs the sliders bolt directly to the frame. I have learned that this is not the case with all sliders for jeeps. That what I woul like to know, the actual mounting points for the rails themselves.
Any help is appreciated though.