Hey guys. I bought a sbc 350 and am currently looking for a th350. I found a freshly rebuilt th350 with a shift kit but it's a 2WD, is that ok? or do i need a 4WD? My 350 is stock. Im going to be using a Np231 The shop want 400$ for the 2WD or 550$ for the 4WD
you are using your stock NP231 right? if so it does not matter 2 or 4 wheel drive as you will need an adapter to run your stock t case. that will run you right around 500 bucks. i just bought one tonight
So um guessing I want a 4WD so theres less driveline angle
i actually don't know. all i know is that is literally the only difference between the two. the internals are all identical. you could swap out the output shaft on the 2wd to a 4wd if you find it needs to be shorter, but by the time you did that you'd have been better off with the 4wd to start with.
2003 Rubicon, 4.0L, 5SPD, Custom 4.75" lift, 33" MT Baja Claws
1999 SE, 2.5L, 5SPD, sold it
PM me for wheeling in and around Northern Illinois