Jeep Wrangler Forum banner

What I did to my Jeep today

1M views 16K replies 2K participants last post by  Dmsr63 
#1 ·
Let's see what everyone is doing to support the aftermarket Jeep companies of the world. Post up anything you've bought or installed on your Jeep today (ongoing...).

If you've installed it this would be a good place to post up a pic too.

Let's see how long we can keep this thread going. :D


I'll start: Viking Fastback Soft Top = Ordered
 
#5,446 ·
got everything unbolted except for the 2 brake lines..

i didnt get the trackbar unbolted from the d35.. i decided to unbolt it from the frame and just worry about it out from under the jeep..

still sucks without help =p plus spent most of the day installing a shower for a friend
 
#5,461 ·
sounds cool dist.. did you snap any pics?

i got my d35 out from under my jeep.. since i couldnt get the trackbar to unbolt from it, i unbolted it from the frame.. this made it a PITA to remove it.. and i broke the last bolt i had to remove.. does anybody know if a dealer will carry a upper CA bolt?

oh well i got it done by myself, only spending about an hour and 45 minutes total over the last 3 nites.. come home at like 8ish, shower, eat, and then go back out to work on my jeep.. what a fun nite =p
 
#5,466 ·
ghey.. i was hoping for a trailer that matched the jeep =D
 
#5,472 ·
4.0L did you sand it down or something or did you just spray it? Looks nice though.
Spent 6 hours preping it.

Cleaned off all greas and junk. spemt alot of time with a the wire wheel. Then sanded a little and took the dremal to it to get all the small spots. Then used that stuff you brush on and hose off and it gets ride of some rust. Then primed and 2 coats of paint. Spent alot of time on it but wanted to make it nice since I will be trussing it and putting in the super35 with arb i have in it.:D
 
#5,475 ·
After the lift and tires this summer I'll take both axles out paint the front do ball joints and all that stuff. I'll do 4.56 or 4.88 depending on what size tire. Put my super 35 in the rear and maybe a super 30 in the front.
this will make me a super turd.



I plan on doing all the axle work my self but this will be a little ways down the road. I couldn't pass up the deal I got on the arb/super35.
 
#5,478 ·
the man in brown came baring gifts..

got my riddler diff covers today =D

then i painted em satin forest green to match my seats.. my gfs dad has my rustoleum satin black paint because he is sand blasting my mirrors for me =D

i got pics ill upload em tomorrow
 
#5,485 ·
yes


sweet no more bent passanger upper!!!! nice...did you change the size or lenth of your uppers or just replace them?
Close. I bent the lower control arm. And it is still bent. Only I twisted it around to put the bend down so I had a better chance of bending it back in place. :cool: The uppers should never fail. They are 1.75 x .375 walled DOM. :cool: How I bent 2" x .500 wall DOM is beyond me.

Mr C, i thought you had the uppers in the rear.
nope
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top