ARB On Board Air Kit - No Power - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > JK Jeep Wrangler Forum > JK Tech Forum

Join Wrangler Forum Today

Thread Tools

Please support our sponsors and let them know you heard about them on
Old 01-15-2011, 05:59 PM   #1
el mono's Avatar
Join Date: Sep 2010
Location: Corpus Christi, TX
Posts: 42
ARB On Board Air Kit - No Power

Testing out the "posting on multiple forums" theory. I bought an ARB kit and installed per a write-up and the ARB wiring diagram. I've checked the fuse, all of the ARB connectors, the relay, and the solderless connectors. No light, no power, nothing. Any ideas?
Attached Thumbnails
Click image for larger version

Name:	image-299553891.jpg
Views:	72
Size:	80.2 KB
ID:	34979   Click image for larger version

Name:	image-1262346008.jpg
Views:	68
Size:	80.4 KB
ID:	34980  

Click image for larger version

Name:	image-1230352193.jpg
Views:	69
Size:	72.9 KB
ID:	34981   Click image for larger version

Name:	image-844490903.jpg
Views:	67
Size:	83.3 KB
ID:	34982  

Click image for larger version

Name:	image-1285801670.jpg
Views:	72
Size:	81.8 KB
ID:	34983   Click image for larger version

Name:	image-201674608.jpg
Views:	69
Size:	84.5 KB
ID:	34984  

Click image for larger version

Name:	image-814925297.jpg
Views:	67
Size:	80.7 KB
ID:	34985  

el mono is offline   Quote
Old 01-16-2011, 12:03 AM   #2

WF Supporting Member
Privateer's Avatar
Join Date: Dec 2010
Location: Riverton, UT
Posts: 33
Never installed any of the ARB stuff yet so not exactly sure of how the schematic. I'd start with a test light from the battery connection following each wire to it's next connection. Also check out if you can make the relay energize by jumping either the power or ground wire on the solenoid terminals (85 & 86 probably) your switch is setup either to provide power or ground to complete that circuit. If all that is good you can check voltage drop with a DVOM check at battery ground and all the grounds you used, I wouldn't want to see more than a .2 volt drop. This checks your connections. Hope this helps some.

It takes infinitely more skill to stop then land, then to land then stop.
Privateer is offline   Quote
Old 01-24-2011, 03:38 AM   #3
el mono's Avatar
Join Date: Sep 2010
Location: Corpus Christi, TX
Posts: 42
You nailed it Privateer: No power to relay. The write-up and wiring diagram differed in that the wiring diagram needed a power source for the relay. Once I spliced into an ignition hot wire I had power. Thank you.
el mono is offline   Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
92 YJ 2.5 Won't start, no power to the fuel pump eyeChrs YJ Tech Forum 15 02-14-2012 04:46 PM
2001 TJ - Auxiliary Power (Switched) - Problem jordan.cook TJ General Discussion Forum 10 12-22-2009 07:16 AM
intermittant power to fuel pump skeeter General Jeep Discussion 4 02-08-2009 08:22 PM
Linear amp Question silvergoat Communications and Electronics 19 11-07-2008 05:11 PM

Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 08:03 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC. is not in any way associated with the Chrysler Motors LLC