Jeep Wrangler Forum banner

Installing Teraflex Leveling Kit - Sway bar link question

2K views 8 replies 5 participants last post by  bearman95 
#1 ·
Hello all. I am installing a Teraflex puck leveling kit this weekend. I believe I read on the forum that some people use the new links the kit comes with on the rear and transfer the rear stock links to the front. What does everyone recommend? Why would I use the new ones for the rear and transfer the rear links to the front. Any input is greatly appreciated!

:beerdrinking:
 
#2 ·
My puck leveling kit from TeraFlex came with new links for the front. I believe transfer procedure only applies when you are doing the lift kits, not the leveling kits.
 
#4 ·
I have a different sway bar link question, thought I would hijack this thread.....

I installed the sway bar links that came with the Teraflex leveling kit. I put the nut that came with the kit on the top and used the old bolt and nut on the bottom. The top nut would not torque (or even really tighten). It looks like the top nut that came in the kit is a lock nut so now I can't even get it off. Any idea on what I screwed up?

Any suggestions how to tighten the nut or how to get it off?
 
#5 ·
The shaft has an Allen head in the end. Use the proper Allen wrench to hold it and a box-end wrench to turn the nut.
 
#7 ·
Installed the kit yesterday.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top