Jeep Wrangler Forum banner

Is anyone using the Rugged Ridge CB mount?

4K views 6 replies 4 participants last post by  Canadian GP 
#1 ·
#5 ·
Keep in mind that, at some point, the footman loop was moved off-center so you may need to mod your bracket to have it centered (If you care).

Also note that none of the current Uniden Bearcat CBs (680, 880, 980) will fit/work with this mount, the radios are too thick/tall at 2.5" and the rear-view mirror interferes. I had to mount my Bearcat 980SSB on the passenger side of the trans tunnel cover, which worked out fine.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top