Jeep Wrangler Forum banner

Metalcloak Game Changer

2K views 8 replies 6 participants last post by  flash1034 
#1 ·
After trial and error with various configurations, and after going through three sets of ball joints, I have recently installed the Metal Cloak Game Changer Fox edition. Wow! What a difference. The Duroflex joints have smoothed out the ride and the first time I got in the rocks and unhooked was off the hook!
 
#2 ·
Nice! I'm saving up to buy the 3.5" game changer ARB edition.

Glad to hear the duroflex joints are as good as advertised. Did you notice a huge difference in flex?
 
#3 ·
You won't be disappointed, the highway ride is much closer to stock than the configuration I was running before. And much more flex. In fact, I need to remove one inch of bump stop to get the full flex- I used two, but only one is necessary and the second inch is limiting up travel.
 
#6 ·
Just keep in mind the CAs need be serviced once a year.
First, thank you to the OP for the thread and for the kudos. I am personally humbled every time one of you uses your hard earned money to buy one of our products and can only hope that we are exceeding your expectations.

A note about maintenance. Early videos and instructions mentioned recommended yearly maintenance. Since then, and since experiencing tens of thousands of on and off road miles, we've learned that annual maintenance was not a requirement or even a recommendation.

For some of you, maintenance may just be the way you take care of your rig and that is totally cool. I know some customers who do that routine with their joints every six months.

I, on the other hand, am not that kind of Jeep owner. I tend to be more neglectful and am running joints in the same rig for three years now, untouched.

Anyway, I hope this clears up any confusion on maintenance.
 
#5 ·
#7 ·
Oh, that's good to know regarding the maintenance.

The less maintenance I need to do the better... Life is busy these days. :)
 
#8 ·
Oh, that's good to know regarding the maintenance. The less maintenance I need to do the better... Life is busy these days. :)
No doubt in was just planning my maintenance schedule with drive shafts and HD ball joints, I'm glad this is one less thing to remember.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top