Jeep Wrangler Forum banner

Question for those running FOX ats performance steering stabilizer

6K views 14 replies 12 participants last post by  drummr25 
#1 ·
My 2017 UJK came modded from the dealer (Sniper Edition). I subsequently upgraded to an ats FOX performance stabilizer because of constant alignment issues. I still seem to have a slight pull to the right regardless of road incline. I have a 3.5 lift on FOX shocks on 35 " tires. Just wondering if others using the same stabilizer feel they have to live with a slight pull?
 
#7 ·
I have the Fox ATS steering stabilizer. I’ve never experienced any noticeable pull to the left or right.

Definitely make sure your vehicle is properly aligned. Also, did you follow the installation instructions to the letter? The installation is not difficult, but there are a couple of steps that require attention.

I am running 35" BF Goodrich T/A KO2s and a 3" lift.
 
#8 ·
I noticed that there is a slight list tilting to the right when looking at the vehicle from the back. Going back to the installer.....I have a BDS lift kit with FOX shocks and 35" Nitto Grapplers for the other poster who asked.
 
#15 ·
I have one as well..and my Jeep doesn't pull. I get the tires balanced with an alignment every 5K on the clock, and I have a 3.5" lift. And it definitely doesn't lean to the right... that would drive my OCD crazy.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top