Jeep Wrangler Forum banner

Radio with Lockpick won't turn on after dead battery

2K views 4 replies 3 participants last post by  RoadiJeff 
#1 ·
For those of you that have a lockpick something i ran into this past weekend...

After running two electric coolers all night I woke up to find the battery (Odyssey PC1500) completely dead. After boosting I could not get the radio to turn on - no life whatsoever.

I spoke with Coastal and they told me that a solution for this is to unplug the ribbon cable at the lockpick module and then let it sit for about 10 minutes. After plugging the cable back in and firing up the Jeep the radio came on right away. Apparently this allows the "energy and cache" in the module to reset and allows the radio to do a clean initialization with the lockpick.

Just in case this helps anyone.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top