Jeep Wrangler Forum banner

RockKrawler Independent 3-Link Upgrade Installed!!

5K views 1 reply 2 participants last post by  ygohome 
#1 ·
Had A little bit of time yesterday to get around to installing the RockKrawler Independent 3-Link Rear upgrade kit on our shop 2 Door. The main benefits of doing this upgrade (which will work with ANY of the othe Mfg's kits AS LONG AS THE LOWER ARMS ARE ADJUSTABLE) is because when Jeep decided to make the rear upper control arms on the OUTSIDE of the frame (a'la Chevy Tahoe) it creates alot of binding, thus restricting flex. By removing the binding points (The upper control arms) you free up the suspension to move freely. This upgrade will include a new rear cradle(with multiple anti-squat choices in arm mounting) to attatch the single upper control arm to, and an upper forward mounting bracket for the new single upper control arm. Here are a few pics of the install. Enjoy!!

Link to pics of the install

http://community.webshots.com/album/560587015NdTwpF


Enjoy!!

Joe
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top