Jeep Wrangler Forum banner

RokShots by High Beam Offroad - anyone running them?

4K views 8 replies 6 participants last post by  Paul04tj 
#1 ·
Anyone running RokShots by High Beam Off-road? If so, could you post some pics showing where and how you have them installed? Also, does anyone have any mounted under the doors and tied in to your interior lights? If so, how did you wire them up?
 
#4 ·
These lights are everywhere, eBay, Amazon, SBL (https://www.superbrightleds.com/cat/led-wired-bolts/).

These you would just run the wires through a hole, slide the bolt in the hole, and run the nut down the wire strand and tighten on the bolt. You need access to both sides so you can put the nut on and have access to the wires. The wires are simple red and black (hot/ground).

I know a few people running these lights - bought from various sellers - and a few of the lights have died. One local seller gives a lifetime warranty, bring the dead one back and get it exchanged right away. These are bright but not as bright as Rigid's set. Then again, you could buy a ton of these for their price.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top