Teraflex 2.5" BB Install - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > JK Jeep Wrangler Forum > JK Tech Forum

Join Wrangler Forum Today

Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 02-03-2008, 08:56 PM
Thread Starter
Join Date: Nov 2006
Location: League City, Texas
Posts: 66
mike79 is on a distinguished road
Teraflex 2.5" BB Install

I installed this kit last night. It did work, but I was not completely satisfied. I would suggest purchasing longer shocks and not using the shock extensions. Some kits may not have any issues, but my front shock extensions were not acceptable.

The first issue that we ran into was the passenger side front shock was pretty rusty and broke when we tried to uninstall it. I was unable to find any shocks for the JK in Houston and nearby neighboring cities. What we ended up doing was modifying a TJ shock with the broken stock and were able to provide a temporary solution.

The second issue I ran into was the threading on the front shock extensions. We could not find a nut that would not strip these. The stock nuts didn't work and we went through the entire selection of nuts at a nearby hardware store. We got them on, but one of them is stripped out pretty good. I definitely would not wheel in this condition.

We played around with the brake line relocation bracket and do not foresee and clearance issues with it. We moved some of the plastic clips around on the ESP wiring to provide more slack for axle movement.

On the front I installed a set of JKS Quicker Disconnects (those things are cool) and have no clearance issues in the front. On the rear I used the links provided by Teraflex and mounted them on the inside and not on the outside like there are stock. After doing this and turning some bolts around I believe we took care of any clearance issues.

I followed the instructions on the Jk-Forum website which were very beneficial. I did not disconnect any of the track bars; because of this I did not experience any noticeable axle shift of changes in stearing. This also saved us a lot of time.

I am happy with this kit and promote it's purchase, but would advise to go with longer shocks and not with the extensions. My problem is that I tried to save money by ordering the extensions and now I have to buy longer shocks anyways. The rest of the install went smoothly and was not too difficult.
mike79 is offline   Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
How To Install Auto Tranny Cooler ? nicolas-eric TJ Tech Forum 18 11-19-2008 12:12 PM
How Hard is it to install Bestop supertop for YJ held4ransom General Jeep Discussion 6 11-12-2008 05:34 PM
lift install / axles install distortedtj Kansas Jeep Forum 12 06-01-2008 04:11 PM
How to install the bestop oversize tire carrier? nicolas-eric TJ General Discussion Forum 3 10-24-2007 01:56 PM
transfer case drop install upinar TJ Tech Forum 5 01-23-2007 11:38 AM

All times are GMT -5. The time now is 09:46 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC
« Back

Enter your email address:

Delivered by FeedBurner