35's with 3.25"lift and 1.25" BL - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 11-16-2009, 05:31 PM   #1
Jeeper
 
mudslinger150's Avatar
 
Join Date: Jul 2009
Location: Northern VT
Posts: 1,128
Images: 1
35's with 3.25"lift and 1.25" BL

I can get a smokin deal on some 35's (BFG mud's) but will they fit?

I have a 3.25" RC lift, 1.25" BL

__________________
Mitch

Vermont
The Green Mountain State

http://www.cardomain.com/ride/3821222

http://www.youtube.com/watch?v=20dGUB6uJcQ
mudslinger150 is offline   Quote Quick Reply
Old 11-16-2009, 05:52 PM   #2
Jeeper
 
Schmo's Avatar
 
Join Date: Jul 2007
Location: SoCal
Posts: 1,586
I bet they'd fit . . . not sure what wheels you have and if you'll need spacers but for the lift, you might need a little extra room depending on how tall your 3.25 really is, but worst case scenerio, you could probably add a small spacer above the spring or add to your bumpstop and clear just fine. What axles do you have and what does your gearing look like now?

__________________
Bite the hand that feeds you . . . you've had more than enough to eat already.
Schmo is offline   Quote Quick Reply
Old 11-16-2009, 05:52 PM   #3
Jeeper
 
ExDementia's Avatar
 
Join Date: Jun 2008
Location: San Diego
Posts: 1,221
Extend your bump stops so you don't rub, make sure you have proper backspacing and you should be ok.
__________________
1991 XJ Cherokee, 4.0, AW4, NP-242, SYE
HP D30, Rusty's axle truss, Currie HD steering, diff. slider
C8.25, Powertrax locker
4.5" RE up front and Rough Country out back
33" BFG A/T's 15" soft 8's
Suspension seats, rock sliders, plated rear corner panels,
trimmed fenders, CB, exhaust, lights, remote locks and start, etc.
Past jeeps:97 TJ, 99 TJ

Quote:
Originally Posted by Geoff@Bestop View Post
In video games, the bad guy's bullets travel much slower than the good guy's bullets.
ExDementia is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Before and After Pics of JKS 1.25" BL dman23 TJ General Discussion Forum 10 06-30-2011 12:44 PM
Installed JKS 1.25" BL.... Shifting Problem! dman23 TJ General Discussion Forum 30 10-25-2009 09:35 PM
1.25" or 2" Body Lift 93yjsplash YJ Tech Forum 11 10-09-2009 01:33 PM
Rough Country Combo Lift 2.5" + 1.25" munroejp TJ General Discussion Forum 12 09-16-2009 09:58 AM
jks 1.25" bl questions... Jonny15 TJ Tech Forum 34 06-01-2009 06:08 PM



Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 11:52 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC