Belly up, Oilpan skid and SYE/CV DS - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 04-12-2007, 03:08 PM   #1
Jeeper
 
dwdrums801's Avatar
 
Join Date: Aug 2006
Location: Long Island, NY
Posts: 1,298
Belly up, Oilpan skid and SYE/CV DS

Ok well I have some more money to spend on the heap and I need some advice

What order should I do these in? Belly up ,Oil pan skid , SYE/CV DS

If I did the SYE/CV DS would it be better to do the belly up 1st? Would the DS be diff. with the stock skid plate then with a belly up plate?

And from what I read the Oil pan skid goes right up to the stock skid so with the belly up skid plate would the oil pan plate be lower then the belly up?

And with the belly up plate would I have to add anything other then a 1" BL?

any help is greatly apretiated

-Billy

__________________
06 Rubi Unlimited, 3.5" Rubicon Express LA, OME Shocks, Metal Cloak Aluminum Bumper, Warn Winch, Power locks/remote start.
dwdrums801 is offline   Quote
Old 04-12-2007, 03:33 PM   #2
Jack Lives Here!!!

WF Supporting Member
 
1BLKJP's Avatar
 
Join Date: Apr 2005
Location: Phoenix, AZ
Posts: 7,764
If you are going to do a Belly up then I would do the SYE/DS at the same time. Figure that the belly up will probably move the TCase somewhere around 2.5 to 3" so you are going to effectively change your pinion angle. So those two mods are very suited to do at the same time.

For an oil pan skid to work with whichever belly up will be determined on which ones you go with or how much you can modify it to fit. Some of the different manufacturer's make skid to go with their belly pan setups.

And no, with the belly up skids that are on the market today you shouldn't need anything other than your a 1" or 1.25" BL to fit them. (Since Nth stopped making their completely flat skid)

__________________
Thanks,
Jack Hickman

President - Arizona Off-Highway Vehicle Coalition
Vice-President - ASA4WDC
Arizona Rock Rats
1BLKJP is offline   Quote
Old 04-12-2007, 03:40 PM   #3
Jeeper
 
Join Date: Sep 2006
Location: pahrump Nevada
Posts: 1,241
do the sye and the belly up first
I get hung up on that shovel under there almost every time I go out
I'm looking at the nth degree mobility belly up you dont need a body lift or motor lift
heres a link
http://nthdegreemobility.com/catalog...products_id=29
mr4x4 is offline   Quote
Old 04-12-2007, 03:44 PM   #4
Jeeper
 
erickpl's Avatar
 
Join Date: Jan 2007
Location: Alabama
Posts: 2,336
Send a message via AIM to erickpl
The skid row engine/oil skid will mate up with most of the belly ups, including the 33 Engineering skid I want.
erickpl is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ordering SYE/CV shaft NalinMFG TJ General Discussion Forum 2 06-09-2008 04:26 PM



Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 06:28 AM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC