Jeep Wrangler Forum banner

blinker issue

1K views 7 replies 4 participants last post by  Dorsk 84 
#1 ·
had jeep 1 month. don't know if front right blinker or side light has ever worked. i got a test light and have power at blinker socket and the ground is hot. bulb worked after testing on left front but not right. i did buy new bulb. spares. still no go. where to trouble shoot now? i did move ground to another spot but no go.
 
#2 ·
I finally replaced the driver side marker socket assembly $32 at local dealer. The contact points for the 168 bulb were black and not seating tight like the passsenger side is. All is good now. Damn, this is the TJ forum. My bad :blackeye
 
#3 ·
blinker issue update

so tonight i jumped back in. took wiring harness and cut away all zip ties so i could tell what i had. as before i put test light on pos batt post and had ground on right front blinker socket. replaced already. swapped test light to neg terminal and had hot wire at right front blinker. so only difference now is the light is illuminating when on but still no blinker. again tried a new bulb but nope. also tried all signals tonight and everything worked except the right front blinker and right front blinker doesn't work when flashers are on. back right flashes fast when right side is on. help :worthy::worthy::worthy::beerme:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top