Delrin door bushings - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum

Join Wrangler Forum Today



Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 05-15-2013, 04:13 PM   #1
Jeeper
 
WVU Mountainman's Avatar
 
Join Date: Jun 2012
Posts: 979
WVU Mountainman is on a distinguished road
Delrin door bushings

I replaced my old steel bushings with the Delrin bushings. Drivers side works great, passenger side door shuts hard. It is sitting slightly higher causing the bottom door latch to hit the bottom of the metal loop mounted to the tub.

I would hate to drive the bushings back out as I do not want to damage them. Instructions with the bushings say not to use a hammer to drive them in further.

I am talking about a very small amount they need to move down.

Suggestions?
WVU Mountainman is offline   Quote
Old 05-15-2013, 06:18 PM   #2
Jeeper
 
WVU Mountainman's Avatar
 
Join Date: Jun 2012
Posts: 979
WVU Mountainman is on a distinguished road
Bump

WVU Mountainman is offline   Quote
Old 05-15-2013, 06:39 PM   #3
Jeeper
 
s14sh3r's Avatar
 
Join Date: Sep 2011
Location: Clayton, OK
Posts: 2,164
s14sh3r is on a distinguished road
File.
s14sh3r is offline   Quote
Old 05-15-2013, 07:51 PM   #4
Jeeper
 
WVU Mountainman's Avatar
 
Join Date: Jun 2012
Posts: 979
WVU Mountainman is on a distinguished road
File the bushings or the socket the bushings go in?
WVU Mountainman is offline   Quote
Old 05-16-2013, 01:39 PM   #5
Jeeper
 
UnlimitedRubicon's Avatar
 
Join Date: Jan 2009
Location: behind enemy lines fighting the Caliban
Posts: 1,906
UnlimitedRubicon is on a distinguished road
who did you buy them from?
UnlimitedRubicon is offline   Quote
Old 05-17-2013, 09:36 AM   #6
Newb
 
Join Date: May 2013
Posts: 8
finch4910 is on a distinguished road
Magnitude Engineering sells the tool to remove and install those bushings. I have one if you would like to borrow.
finch4910 is offline   Quote
Old 05-17-2013, 09:42 AM   #7
Rock-Rubber

WF Supporting Member
 
GoldenSahara00's Avatar
 
Join Date: Aug 2010
Location: SCPA
Posts: 16,965
GoldenSahara00 is on a distinguished road
Unbolt the door hinges, realign the door, and re-bolt the hinges is the correct way to do it, I believe.
__________________
Ryan - A good eye, a light foot, and a smart rig.
Bolt-ons are boring
AMERICAN JEEPER
My Build - http://www.wranglerforum.com/f118/pr...a00-74622.html
Rausch Creek Trip: 2014 Trip Coming Soon
GoldenSahara00 is offline   Quote
Old 05-17-2013, 09:44 AM   #8
Jeeper
 
Mcatt's Avatar
 
Join Date: Feb 2013
Location: Broadview Hts, Ohio ( Cleveland)
Posts: 121
Mcatt is on a distinguished road
Adjust the striker loop. Loosen the bolts a little and tap it up with a small hammer. Hit the mounting plate NOT the loop.

__________________
It's better to burnout, than to fade away.
Mcatt is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 03:58 PM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC