Engine code P1391 & P0303 - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 03-17-2013, 07:51 PM   #1
Newb
 
Join Date: Mar 2013
Posts: 1
Engine code P1391 & P0303

I have had the same engine code on my 97 2.5 wrangler since I got it nearly a year ago. I put a new crank shaft position sensor on it two days ago and the check engine light went away. But then came back 24 hours later. I erased the code, then came back after around 10 miles of driving. But this time the P0303 came back with it. Which is a misfire on cylinder 3. But jeep drives fine. Any ideas? Thanks

Creepin97 is offline   Quote
Old 10-11-2014, 07:28 PM   #2
Jeeper
 
signguy62's Avatar
 
Join Date: Oct 2014
Posts: 19
Check the connection between the new sensor and the wiring harness. Those pins wear and get loose over time. You can get a new pigtail with connector or the wires can be cut and soldered together.
signguy62 is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 01:54 PM.



Jeepģ, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC