Heat - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 01-14-2006, 11:03 PM   #1
Jeeper
 
Join Date: Dec 2005
Location: Connecticut
Posts: 23
Question Heat

Recently my jeep has not been blowing the heat where I set the vent to no matter what it is blowing heat from the 2 dashboard vents closet to the windows even if I set it to blow on the floor... has any one experience this before

memsimba is offline   Quote
Old 01-15-2006, 12:35 AM   #2
Jeeper
 
amerijeep's Avatar
 
Join Date: Apr 2005
Location: Mississippi.
Posts: 4,057
My YJ only blows from the defrost and the floor. The vents are for fresh air. The fan doesn't blow through them.

__________________
To all who serve, Thank You.
amerijeep is offline   Quote
Old 01-15-2006, 09:01 AM   #3
Jeeper
 
Join Date: Dec 2005
Location: Connecticut
Posts: 23
the thing is that I am not gett heat from the floor and no defrost for the wind when i used too.
memsimba is offline   Quote
Old 01-15-2006, 11:02 AM   #4
Jeeper
 
amerijeep's Avatar
 
Join Date: Apr 2005
Location: Mississippi.
Posts: 4,057
Does the fan blow?

I'm not sure, but I think the duct positions switch by vacuum lines that are connected to a diaphragm on a lever inside the dash.

I have a YJ, so I know I can't be much help to you.
__________________
To all who serve, Thank You.
amerijeep is offline   Quote
Old 01-15-2006, 06:01 PM   #5
Newb
 
Join Date: Jan 2006
Location: Central Michigan
Posts: 11
Crawl under the drivers side dash and look to the right of the skinny pedal. You will see a couple of vacuum pull offs for the blend doors. Have someone move the vent switch from floor to vent to defrost and see if all actuators are moving. Then make sure the blend doors are not broken (common problem on TJs). Mine will not switch to defrost currently and there is a fix where you run a small screw through the end of the blend door arm to make it work. HTH
__________________
97 Sport 4.0l Auto D30/D35 (3.07 - I know )
2" BB Skyjacker, 1" BL, 1" MML, 285/75/16 (33") Goodyear MTRs, 16x8 MT Classic Locks, Warn Front Bumper, Warn Rear w/ Tire Carrier, Jeeperman Front Hoop, Hella 500s, H4 Conversion, Cobra 75WXST.

Up Next: More Armor, Gears, Lockers, New Radiator (70k and leaking), ???.

3.07 Gears Club Member #1
Hunter9 is offline   Quote
Old 01-15-2006, 09:25 PM   #6
Jeeper
 
Join Date: Dec 2005
Location: Connecticut
Posts: 23
yes the bower works ---- Thanks for the tip I will check tommorrow

memsimba is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
No Heat? squeaks TJ Tech Forum 34 04-02-2009 06:57 PM
heat abecker TJ General Discussion Forum 4 01-28-2009 11:56 AM
Problem with heat orange05tj TJ Tech Forum 4 01-16-2009 02:21 PM
heat help...? nregas1 TJ Tech Forum 8 03-01-2008 02:41 AM
Wow I didn't think it put out this much heat blueroo General Jeep Discussion 6 02-23-2008 01:48 AM



Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 12:48 PM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC