What you are talking about is really called the clutch master cylinder. The slave cylinder being the throw out bearing.To replace it just unhook the lines and pedel. Then unbolt and remove.Then in stall the new one and bleed in with two people. On some cars for the clutch it's hard to bleed with out a vacume or pressure bleeder but on a tj you don't need one.
flowmaster40,hpd30 with aussie locker,currie upper joints,4.88's, lca skids,chromo shafts,vanco brakes,d35 with super 35 and arb locker,re 4.5" springs,currie arms,re front uppers,Re shocks in back,walkerevens shocks up front, Re track bars with currie jj joints,anti rock,ss brake lines,re rear sway bar links,jks 1.25" bl and mml,bfg 35x12.5 km2's,craiger soft 8's,ome steering stabilizer,currie hd steering,rockmen front bumper,emp tank skid,lots more too.