I can't find a mounting plate for a Runva 8000 winch. the mounting pattern is5.9" x 4.5". Does anyone know of a universal plate or where I can get a specific pate made for mounting this winch?
2014 Oscar Mike Edition 2 Dr. - 4" Lift W/ 35's, 4.88 gears, ARB Lockers Front/Rear, Olympic Front/Rear Bumber with Quadratec 9000 winch, Magellian 7" NAV and back-up camera, Poison spider tramp-stamp/rear tire delete.
Some of those fine winches like that are rated while pulling on a mild slope not like what one on a jeep would be used. Does that winch have a crank handle on it like a boat trailer would have or is it electric?
I see now! it has a real short drum and only holds 45' of cable, Ya a drill motor and a sharp drill bit will fix that.
My Jeep is NOT an suv and Your suv is NOT a Jeep
I found it on Runva's website & it says the Runva 8000's mounting bolt pattern is the standard 10x4.5" I mentioned above. Runva 8000 lb. winch Something isn't right somewhere. With that smaller 5.9x4.5" mounting bolt pattern, it doesn't sound like one of their 8,000 lb. winches... like it is something much smaller in reality.
Gone wheeling, back late sunday... Remember that having a different opinion doesn't also require one to be a jerk when expressing it.