I have a P0132 code on my Wrangler. Help please - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 07-09-2013, 05:50 PM   #1
Jeeper
 
wranglerflow's Avatar
 
Join Date: Feb 2013
Posts: 41
Arrow I have a P0132 code on my Wrangler. Help please

Hello there, I have a quick question,
Yesterday my check engine light went on and I checke dit today, turns out I have a P0132 code.. The person told me to do some research, but i know it regards my O2 sensor. like 2 months ago, I had already changed the upstream sensor, now I guess its the down stream, I tried to change my downstream sensor but i was kind of difficult because of a tight space and it seems to be really stuck, and since I didn't have the right tools at the time, I messed up some of the corners on the sensor because the ratchet didn't fit in all that good..

now I have a o2 sensor socket but when I try turn it just pops out of place and slips through the sensor. Can anyone give me any tips on how to loosen up the sensor so it can be less difficult to loosen up ??

In advance thanks a lot for your help.

wranglerflow is offline   Quote Quick Reply
Old 07-09-2013, 07:55 PM   #2
Jeeper
 
mrk130's Avatar
 
Join Date: Jan 2013
Location: Little Ferry NJ
Posts: 90
I forget which years have 2 upstream O2 sensors. Mine is an 05 and I have (2) upstream sensors, bank 1 and bank 2. You will be able to see both sensors if you have them. If you do in fact have 2 front O2 sensors, this code is for bank 1, which is the closest to the front of the engine.

mrk130 is offline   Quote Quick Reply
Old 07-09-2013, 08:36 PM   #3
This space for rent

WF Supporting Member
::WF Moderator::
 
Beastmaster's Avatar
 
Join Date: Aug 2011
Location: The Old Pubelo
Posts: 23,007
I don't have a TJ but this may help:

http://www.wranglerforum.com/f5/o2-s...ved-19067.html
Beastmaster is offline   Quote Quick Reply
Old 07-09-2013, 08:41 PM   #4
Commercial Member

WF Supporting Member
 
Big Sarge's Avatar
 
Join Date: Dec 2012
Location: Chester Virginia
Posts: 3,034
What brand sensor did you replace with?? If you used anything other than the NTK (especially Bosch) it may be the same sensor giving you a code again. NTK perform the best in Our jeeps.

And those o2 sensor sockets are a waste of money IMO. Use a 7/8 box end wrench. Just unplug the sensor first and run the wire through it if you can't get it with the open end.
__________________
click the link below to view my Custom Jeep shifters, pool ball shifters. College Teams now available
http://www.wranglerforum.com/f37/custom-camo-pool-ball-shifters-224388.html

_______
/l ,[____],
l---L -OlllllllO-
()_) ()_)--o-)_)
Big Sarge is offline   Quote Quick Reply
Old 07-10-2013, 12:40 AM   #5
Jeeper
 
Smashbox's Avatar
 
Join Date: May 2013
Posts: 70
0123 on my 03 was for my throttle position sensor. Replaced the sensor then disconnected my battery for 10 minutes and it was all good.
Smashbox is offline   Quote Quick Reply
Old 07-20-2013, 12:10 PM   #6
Jeeper
 
wranglerflow's Avatar
 
Join Date: Feb 2013
Posts: 41
Quote:
Originally Posted by mrk130 View Post
I forget which years have 2 upstream O2 sensors. Mine is an 05 and I have (2) upstream sensors, bank 1 and bank 2. You will be able to see both sensors if you have them. If you do in fact have 2 front O2 sensors, this code is for bank 1, which is the closest to the front of the engine.
yeah I only have 2 sensor. The upstream and the downstream. And I just changed the downstream recently...
wranglerflow is offline   Quote Quick Reply
Old 07-20-2013, 12:11 PM   #7
Jeeper
 
wranglerflow's Avatar
 
Join Date: Feb 2013
Posts: 41
Quote:
Originally Posted by Beastmaster View Post
I don't have a TJ but this may help:

http://www.wranglerforum.com/f5/o2-s...ved-19067.html
And thanks for.the link. I checked it out and it was sure of help ")
wranglerflow is offline   Quote Quick Reply
Old 07-20-2013, 12:15 PM   #8
Jeeper
 
wranglerflow's Avatar
 
Join Date: Feb 2013
Posts: 41
Quote:
Originally Posted by Big Sarge View Post
What brand sensor did you replace with?? If you used anything other than the NTK (especially Bosch) it may be the same sensor giving you a code again. NTK perform the best in Our jeeps.

And those o2 sensor sockets are a waste of money IMO. Use a 7/8 box end wrench. Just unplug the sensor first and run the wire through it if you can't get it with the open end.
Yeah,i noticed they are a waste of $. I ended up taking it to a shop, they charged me $30 which wasnt all that bad. I just,wanted to.get that done with, now it seems to run all good.but the problem is I think my fuel.pump is.messed up cause at times it feels like my wrangler dies out and wants to turn.off.cause the Rpm.goes below what its supposed to be at "the 1" ..
I read that you can clean the fuel.pump with some petroleum, I forgot the name of.it.. Have any of you guys ever done that??


And the o2 sensor I put on the downstream is "DENSO"

wranglerflow is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




» Featured Product

All times are GMT -5. The time now is 04:12 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC