There should be holes there already. There will be one in the middle, right behind where the seat stops for the 2 short sides of the belts in the middle. There should be a threaded hole on each fender to secure the bottom of the 3 point harnesses, and there should be notches on the roll bar at the fender for the mechanism to "snap" into (maybe a threaded hole as well, I can't remember, and I don't have the factory roll cage any more). There should also be a threaded hole in the top part of te roll cage for securing the top bracket of the 3 point harness.
You should not have to drill any holes if you have the factory stuff, otherwise, I don't know what to tell you. Good luck and post pictures of what you have if it's not factory.
Originally Posted by Scout
I like "prick".
Go ahead...quote me on that.
"Hold my beer while I kiss your girlfriend... you have to be good for something"
If you have to ask what it is or what it does, you don't need it, and you will need help to install it!