Jeep Wrangler Forum banner

JKS rear track bar with Metalcloak relocation bracket?

1K views 4 replies 2 participants last post by  Hammerwalk 
#1 ·
Hey y'all,

quick question here. I ordered my Metalcloak rear uppers yesterday and also ordered their track bar relocation bracket as well to adjust rear pinion when I install my SYE and new drive shaft.

I just got a call from MC regarding my order, and the guy I talked to said "as a reminder, our relocation brackets run a larger bolt that will not fit stock track bar". I asked about JKS track bars and he was not able to answer, understandably, because their brackets are made for their track bars.

Does anyone know if it will fit the JKS, or should I just cancel that part and order JKS relocation bracket? I only did this under the presumption that they were all generic and to order both from one place instead of 2 parts from two places and 2 shipping ...
 
#3 ·
If JKS track bars would fit their relocation bracket .... He said he didn't know, which I understandably expected that answer.

It = MC track bar relocation bracket JKS = JKS track bar.

Yet their site says ...

"Each Rear Track Bar Relocation Bracket includes:

  • Track Bar Mounting Bracket
  • Mounting & Assembly Hardware
For use with the MetalCloak TJ Rear Durotrak Track Bar (7046) or Stock Rear Track Bar "

So I was looking to see if someone out there has a JKS track bar with a Metalcloak rear track bar relocation bracket and if they fit.
 
#5 ·
Thank you. i had read that same document but was not aware of stock bolt size and was trying to find documentation as to what came with my track bars. I thought they were bigger than stock.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top