I installed tube fenders last month and I,m just now getting around to wiring up my turn signals.
I bought a set of 3 wire LED turn signals. (2)Mini 1" Amber 3 LED Custom Marker Turn Signal Lights: eBay Motors (item 400164525768 end time Nov-14-10 21:10:53 PST)
I wired them to the 3 wire turn signal light in the front of the jeep and it was flashing very fast and the blinker only worked when the lights were on.
I removed my turn signal relay and modified it per Stus write up and that fixed the rapid flash.
My problem is that the signals only flash when the lights are turned on. If I swap the red and white wires then the blinker works but the parking lights do not, and it will not flash with the light switch on.
Do I have the wrong type of lights?
What do I need to make these work?