lower adjustable control arms - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 05-22-2006, 06:12 PM   #1
Jeeper
 
mrbigjeep's Avatar
 
Join Date: Apr 2006
Posts: 4,288
lower adjustable control arms

if i get a 4 inch lift kit, do i have to get the adjustable control arms? i have heard that if i want to run a sye that i have to get adjustable control arms...can i run a sye without adjustable control arms?

mrbigjeep is offline   Quote Quick Reply
Old 05-22-2006, 07:09 PM   #2
coilovers are damn flexy
 
bluvikng's Avatar
 
Join Date: Mar 2006
Location: Texas
Posts: 3,260
4" lift

Most lifts come with longer lower control arms. They also come with a skid plate drop, to aid in the rear drive shaft angle. If you would like to keep your skid plate tucked up tight, than a SYE kit is manditory. There are a lot of people running the 4" lift, that have not done the SYE. It is preferable, if you want the maximum clearance possible.

bluvikng is offline   Quote Quick Reply
Old 05-22-2006, 08:03 PM   #3
Jeeper
 
mrbigjeep's Avatar
 
Join Date: Apr 2006
Posts: 4,288
will the standard rough country 4 inch lift kit be fine without adjustable lower control arms?...i know it has lower control arms but i dont know if they are longer...they probably are...i guess i could always get it and just not run the SYE (if you do have to have the adjustable lower control arms)
mrbigjeep is offline   Quote Quick Reply
Old 05-23-2006, 11:44 AM   #4
coilovers are damn flexy
 
bluvikng's Avatar
 
Join Date: Mar 2006
Location: Texas
Posts: 3,260
Lower control arms

The longer control arms that will come with your kit is sufficient for making up the difference in your lift. Just remember that the lower control arms will dictate your wheel base. The upper control arms will adjust your pinion angle on your axle. Hence that is usually what some people do, to get the vibration out of their driveline. They get adjustable upper control arms, which will allow them to pivot the pinion back a bit. That will help line up the driveshaft angle. But that is a whole other ball of wax. You do not want to do that unless you have the SYE already installed.
bluvikng is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Pair of .500 DOM lower control arms + pair .375 DOM controls (KS) MR.CLIFFORD Classifieds Archive 4 12-28-2007 08:11 AM
Installing lower control arms. Help Triple88a TJ Tech Forum 4 09-30-2007 08:23 PM
Cam bolts on front lower control arms kg4kpg TJ General Discussion Forum 8 09-22-2007 09:14 AM
Adjustable front lower control arms kg4kpg Classifieds Archive 0 09-21-2007 10:05 PM
Adjustable control arms? gregg bowie TJ Tech Forum 4 06-20-2006 10:44 PM



» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 06:12 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC