Got the front done with no problems. On the back the directions say to install spacer over top bump stop tube. Do I take the bump stop tube off or what? The spacer is solid with no hole in it. Any help is sincerely appreciated
The spacer needs to have a hole in it to fit around the bump stop. I am wondering if you have a wrong part. The front and rear spacer if I remember correctly are the same. Here are the ones I purchased and installed. http://www.4wheelerssupply.com/catal...oducts_id/1860
2000 Sahara, 3.5" Rubicon Express Lift, 1" spring spacer & 1" Body Lift, 33" or 35" BFG Mud tires, Front & Rear ARB, Rancho 9000 shocks, UCF Ultra High Belly Up
I just completed my BB kit and the rear pucks are the exact same size and dimensions as the front pucks. If they are not, I would contact the place of purchase. Once you get the correct rear pucks, to have to remove the bumpstops and the bumpstop cups and it will slide over the center post.
You nailed it. I called them this morning at 7 and the tech told me the same thing. I thought so but the damn directions said to put over the bump stop. Anyway they are on and it looks pretty good. Now for some tires