I have a Mystery Switch.
I have a Mystery Wiring Harness
I have a Mystery Air Intake
Air intake system first - it is not really a mystery, save for the collection of parts.
This jeep came with an AIRAID cold air intake. I am pretty sure it is this
The filter is ruined and I could not find a local AIRAID dealer. The aid dam cover is gone, too. I have an oblong K&N on there now (only because it fits pretty well) and it seems to work as a *temporary* solution. There is no air dam now, so I am sure it is letting junk in. The conical K&N filter that looked like the AIRAID one was too large to mate to the AIRAID hose.
The wiring harness looks like it is for a trailer. It is long enough to dangle out the rear window or (cringe) shut into the door. I have never seen a trailer harness that was kept inside the vehicle rather than down by the hitch. I have not yet checked, but if the PO actually towed with this jeep I hope the bumper has frame tie-ins! I will look for those later on.
The switch on the dash has no positive function. I turned it on and off repeatedly with the jeep running and with it off. No lights or sounds. Could it be to the wiring harness? Would a trailer harness have a switch for some reason? I have never towed anything of my own, only ever borrowing a vehicle with the trailer already hitched up and wired. The RV my I used to help with as a kid had a much larger harness for brakes and such. So I am at a loss on this switch.
Does anyone recognize it as being a part of some aftermarket kit? Like it is used by a particular company or something? I am guessing it is generic Radio Shack stuff.
Lots of words to read. So to summarize:
1 - In the photos, does it look like that is the OEM tube from the throttle body to the short AIRAID tube?
2 - In the photos, does anyone positively recognize this type of connector? It has three red LEDs marked TM, LT, and RT. (trailer main, left turn and right turn?)
3 - In the photos, does anyone recognize this rocker switch as being a part of a kit or would it be a part of the wiring harness in the back?