Jeep Wrangler Forum banner

stock spring spacer/lift question

2K views 2 replies 3 participants last post by  nater344 
#1 ·
What is the thickness of a stock spring spacer? I would guess they would be in the 1/4"-1/2" range and used just as a cushion so the spring isn't riding on steel. I was poking around the jeep and it looks like there is a thicker spacer on it, maybe 2". Not certain as there is still plenty of snow to lay in. I bought the jeep with a Pro Comp 4" lift installed but it looks higher than that. Although it has a TC drop, I also have drive train vibration. If its 4" with stock spacers, I'll go with a SYE/CV. If it has larger than stock spacer, I'll remove them. Running 33" tires with no immediate plans to go larger. Also though about changing the springs.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top