Hey guys, here's my predicament:
No matter what, my blower has always been on when the Jeep is running, usually I was able to keep it on low and "colder" air (as I have no AC) when the outside temp is hot.
Well, recently my core sprung a leak and I took it on and replaced it. This is nice because I have nice hot and toasty heat...but now I can't turn it off-even on the lowest blower setting and the dial cranked towards cold.
I checked my vacuum line and saw no leaks; checked both connections and noticed no cracking. The unit located underneath the battery (sorry I forgot the name) I read is notorious for going out/cracking, but from what I saw it was fine. When I unplugged the hose it let out a good amount of pressure which tells me there is no leak.
Would anyone else know where to start on this? It's not an emergency, just annoying and summer in WA state is coming up.