I have a '03 Wrangler X. I have a trailer with lights but I have no wiring on the vehicle. I bought a Hoppy wiring kit. I pulled down the mud flap behind the rear wheel on passenger side. I am just not seeing the connector that according to the instructions and a video I watched says should be there.
Hope I have been accurate in the descripton. And thanks for any help.
It depends on the connector and wiring harnes you are putting in. Some have a single large connector that pics up all the wires needed at one connections. Some pic up each side indivisually with two sameller connectors.
Trust us, the connector is up inside there, you're just not looking hard enough or deeply enough inside the corner. It is there, stick your hand up inside and when you feel wiring, pull it down and the connector will come down with it.
And whether the connector is on the left, right, or you need to connect to both sides depends on the model year TJ.
__________________ When you have a choice, buy American.
Yea, it's not a separate connector, it is the wiring. there should be plastic block style plug that connects the wires from the lights to the wiring harness that runs along the underside of the body. find that block separate it, and plug your tow kit wiring harness into it.