Originally Posted by sethert
97 wrangler headlights work, backup lights work, but no brake lights or blinkers......checked all fuses and relays .....nothing....any ideas
i recently had the whole tub of the frame and all grounds were accounted for ( i think )
also in the instrument cluster i dont have dash guages but the dummy lights work
Try applying the brake and move the turn signal switch up & down and see if your brake lights work. OR squirt a LITTLE BIT of electrical contact cleaner into the turn signal housing. If you start to get a few blinks or lights appear, you need to replace the turn signal switch. ($30 bucks from Advance Auto/Auto Zone) if ya do, you do not have to take the wheel off like the "dealer" told me. I did it myself in a half hour. My problem was that my signals worked but then mysterously would stay lit constant, and my brake lights went into 4- hazard mode. But not no more! LoL. Hope this helps....