Jeep Wrangler Forum banner

1989 4.2L YJ Engine Rebuild - Help!

971 views 1 reply 2 participants last post by  Luckymac 
#1 ·
Bought a 1989 YJ 6 cylinder 4.2L Jeep. Bad rattle in the low end pointing to spun bearing or something. Trying to locate a shop or advice to rebuild the engine, or perhaps get a rebuilt long block. We are in the Boston area. Any help welcome! Engine is almost out and would like to rebuild or replace as soon as possible. Any local mechanics or garages? Any advice on places to get a rebuilt or good used engine? I see there are ATK units out there for $2,000+... Thanks!
 
#2 ·
Google "Engine rebuilders Boston area". Then do a BBB reference search. Ask around your Jeeper buddys where they would go. Make sure that they give a written gaurantee. Most engine remanufacturers will give a real good warranty if they do the install.
The longer they have been in business the better.


Good Luck, L.M.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top