Ok guys Ive researched alot now and I got kinda tired reading off many posts, hopefully you guys can help ne out
I have a 1990 4.2 5spd YJ with a Motorcraft 2100, thats how I bought it a year ago.
Today I bought some tubes to connect them from the transfer switch to vacuum actuator and manifold, I based my connections on some diagrams, I replaced the transfer vacuum switch and cleaned the actuator and fork... I dont know where to connect the red vacuum line which goes to the manifold, the carb is different than the other carbs that Ive seen on pics. So I need help with this. Also my green and yellow lines that I have connected to the actuator dont have any vacuum when I check them on 2wd and 4wd L or H.... I suppose my actuator and fork are just fine...
Like I said my lines were broken off and I never knew how they were suppose to be connected and I really WANT to fix the vacuum, I dont want the posi lock thing..
Thanks for all Help, and PICTURES OF ALL CONNECTIONS WOULD BE GREATLY APPRECIATED.