Jeep Wrangler Forum banner

1992 Wrangler Won't Start

9K views 8 replies 6 participants last post by  zhenke 
#1 ·
I've had a 1992 4.0L L6 Wrangler for a couple months now. A week ago I began having clutch issues which in turn caused me to stall it out multiple times. I eventually got it off the road. I'm obviously still have clutch issues. Most likely it is clutch master cylinder related, but more importantly I can no longer start it. Not sure if they are related or just coincidence???
I checked to see if I was getting a spark out of my spark plugs and realized that I was not. I then checked my coil and replaced it, but that didn't fix it. I am not getting a spark from it either. So it must be whatever comes before that. Computer, relays, other? Any help would be appreciated.
 
#5 ·
same issue

I have 88 6cyl I have replaced coil and dist. Just no spark getting 7v to coil and the same coming out. Getting changed value(don't know the correct value) coming out of the dist to trigger the ECU or whatever it is called behind the glovebox. So I don't think it is the coil pick up is good but no spark to plugs. :banghead:
 
#6 ·
OK jeep cg I'm pretty sure ur prob is the ignition control module under the windshield wiperfluisd resivour u should look into the nutter conversion it bypasses the factory ecu gives u better power and little more reliable personaly i would find some of the posts on here that detail ignition control mod probs and see if their are any symptoms that match urs
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top