1999 doors - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 01-10-2014, 09:05 PM   #1
Jeeper
 
Join Date: Jan 2014
Location: New Jersey
Posts: 49
1999 doors

will 1999 doors fit on a 1995.

marshall1225 is offline   Quote
Old 01-10-2014, 10:35 PM   #2
jokerchief462

WF Supporting Member
 
jokerchief462's Avatar
 
Join Date: Apr 2012
Location: North Las Vegas
Posts: 9,831
Tough one no idea BUMP!!!

__________________
89 2.5 TBI, 4" RC lift, 1" Booms, SYE, Adams Driveshafts front and rear, Ford 8.8 with 4:88s, BFG 33X12.50X15, and a ton of other stuff.

AF Jeep Club Tail Number 184
jokerchief462 is online now   Quote
Old 01-10-2014, 10:57 PM   #3
Jeeper
 
ddferdt's Avatar
 
Join Date: Mar 2013
Location: Long Island, New York
Posts: 244
Quote:
Originally Posted by jokerchief462 View Post
Tough one no idea BUMP!!!
Not sure if this was sarcasm or not. But yes, they'll fit. You'll need to modify the door strike though.
ddferdt is offline   Quote
Old 01-11-2014, 08:52 AM   #4
RUBISEAN

WF Supporting Member
 
mcseang's Avatar
 
Join Date: Sep 2011
Location: wesley chapel,fl
Posts: 445
i am pretty sure the rake of the windshield is different. the window frame on the door will not match the rake of the windshield frame
__________________
check out my build thread...BLUE BALLED BUILD
http://www.wranglerforum.com/f8/blue...ld-122927.html
mcseang is offline   Quote
Old 01-12-2014, 01:21 PM   #5
Jeeper
 
Join Date: Jan 2014
Location: New Jersey
Posts: 49
It seems everything I have been finding says they will not fit.
marshall1225 is offline   Quote
Old 01-12-2014, 03:30 PM   #6
Jeeper
 
1991 jeep wrangler 4x4's Avatar
 
Join Date: Jul 2013
Location: palos verdes, California
Posts: 350
i have tj full doors and they fit on my yj fine, why would you need to modify the door strikes ??
__________________
1991 YJ 2.5l 4 Cylinder, 4.5 Inch Lift, 31's, SYE, SOA Rear, CV Drive Shafts, 5 Speed AX-5 with NP-231 Transfer Case, 4.88 Gears.
1991 jeep wrangler 4x4 is offline   Quote
Old 01-12-2014, 03:40 PM   #7
Jeeper
 
Join Date: Jan 2014
Posts: 199
you need to modify the door strikes from the cj to the yj, but not from the yj to the tj
scukfan is offline   Quote
Old 01-12-2014, 06:59 PM   #8
Jeeper
 
ddferdt's Avatar
 
Join Date: Mar 2013
Location: Long Island, New York
Posts: 244
Quote:
Originally Posted by scukfan View Post
you need to modify the door strikes from the cj to the yj, but not from the yj to the tj
My bad, I had them backwards
ddferdt is offline   Quote
Old 01-12-2014, 08:23 PM   #9
Jeeper
 
1991 jeep wrangler 4x4's Avatar
 
Join Date: Jul 2013
Location: palos verdes, California
Posts: 350
yeah i just noticed them lol i looked at my door strikes and the PO made his own from a bold because the diameter of the tj door strike pin is small and the yj ones are fat, there fore you can use tj doors like mine BUT you need to costom make a door striker pin.
__________________
1991 YJ 2.5l 4 Cylinder, 4.5 Inch Lift, 31's, SYE, SOA Rear, CV Drive Shafts, 5 Speed AX-5 with NP-231 Transfer Case, 4.88 Gears.
1991 jeep wrangler 4x4 is offline   Quote
Old 01-12-2014, 09:25 PM   #10
Jeeper
 
Join Date: Aug 2011
Location: north of St.Franisville La.
Posts: 2,513
Send a message via Yahoo to Nubby55
Is the wind shield angle the same are not?
Nubby55 is offline   Quote
Old 01-12-2014, 10:07 PM   #11
Jeeper
 
1991 jeep wrangler 4x4's Avatar
 
Join Date: Jul 2013
Location: palos verdes, California
Posts: 350
its the same
__________________
1991 YJ 2.5l 4 Cylinder, 4.5 Inch Lift, 31's, SYE, SOA Rear, CV Drive Shafts, 5 Speed AX-5 with NP-231 Transfer Case, 4.88 Gears.
1991 jeep wrangler 4x4 is offline   Quote
Old 01-12-2014, 10:51 PM   #12
Jeeper

WF Supporting Member
 
Join Date: Jan 2014
Location: Dallas Ore.
Posts: 228
this is good news , now i can look at 1/2 doors for a tj for my YJ
Richard_95YJ is offline   Quote
Old 01-12-2014, 11:15 PM   #13
2xs
Cali Smog Nazi.

WF Supporting Member
 
2xs's Avatar
 
Join Date: Jun 2011
Location: Santa Rosa, Ca.
Posts: 2,683
Images: 3
I do know YJ half doors on a TJ dont work, after you figure out the striker, the dash gets in the way of the yJ inner handle, so you cant open them from the inside.

As far as TJ doors on a YJ, the striker is different, try to get TJ strikers, and enjoy!
__________________
'93 Black YJ, 4.0L AX15 - UNDER CONSTRUCTION!
http://www.wranglerforum.com/f330/2x...ad-490865.html
'04 SV1000s:
http://www.svrider.com/forum/showthread.php?t=280873
Old Jeep that was totaled (and SOLD!):
http://www.wranglerforum.com/f330/2x...ad-101879.html
2xs is offline   Quote
Old 01-13-2014, 12:40 AM   #14
Jeeper
 
1991 jeep wrangler 4x4's Avatar
 
Join Date: Jul 2013
Location: palos verdes, California
Posts: 350
take a small diameter bolt and file the threads off of the tip for the door striker

__________________
1991 YJ 2.5l 4 Cylinder, 4.5 Inch Lift, 31's, SYE, SOA Rear, CV Drive Shafts, 5 Speed AX-5 with NP-231 Transfer Case, 4.88 Gears.
1991 jeep wrangler 4x4 is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 11:16 PM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC