2.5l to 4.0L Swap. - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 06-10-2011, 10:12 PM   #1
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
2.5l to 4.0L Swap.

Hello Guys and Gals, I am about half way through my 2.5L to 4.0L engine swap and am waiting on parts so I decided to do a write up. Enjoy

__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 06-10-2011, 10:17 PM   #2
Dont forget a Jack strap

WF Supporting Member
 
jkaufman_95's Avatar
 
Join Date: Sep 2010
Location: On the Road,
Posts: 30,846
Where's the write up? Haha why not go to a bigger engine if your gonna swap em

__________________
Do I look like a cat to you boy? Am I jumpin' around all nimbly bimbly from tree to tree? Am I drinking milk from a saucer? DO YOU SEE ME EATING MICE?
jkaufman_95 is offline   Quote Quick Reply
Old 06-10-2011, 10:23 PM   #3
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
Sorry I was getting all my pictures lined up on photobucket will finish in a minute. The only reason I didn't go with a bigger engine was I had a complete donor cherokee that I could get everything I needed from sitting in the garage.
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 06-10-2011, 10:27 PM   #4
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
I started with a 94 YJ 2.5L 5 speed and am putting a 97 cherokee 4.0l with a 90 cherokee 5 speed. Here are a few pics of pulling the engine.
The 2.5L still in the jeep
I removed the front clip for ease of access and pulled the engine and trans separate

Here is a pic of the jeep in the day light.
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 06-10-2011, 10:32 PM   #5
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
Sorry for the bad picture quality, It was all done on a cell phone because I don't have a camera. Everything to this point is really all standard issue engine swap. Unbolt the front clip, unhook all the wiring from the firewall and lay it on the engine, unbolt the bellhousing bolt and engine mounts and lift. At this point it was all done in my backyard and I pulled the transmission there too. Afterwards a buddy pulled it to his garage so I could work on it while it was 100 degrees outside.
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 06-10-2011, 10:32 PM   #6
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
Feel free to ask any questions if I am too vague on any part of the swap.
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 06-10-2011, 10:42 PM   #7
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
For me the hardest part of this swap has been finding parts and the wiring harness. I took an extra 2.5L wiring harness I had and spliced it with the 4.0L cherokee. The Wrangler harness was a breeze compared to the cherokee harness. The cherokee harness had cruise control and A/C both of which I ditched for this swap. Also on the wrangler wiring harness all the front lights are on a seperate harness where on the cherokee it is in the same as the engine harness. I'm not the best with wiring so I took and striped all the plastic off the wrangler harness and found every wire that went through the firewall and chased it down and saw what it did. I wrote down every wire and wire color that went through the firewall and where it went through the firewall at. I then stripped the cherokee harness and found only the wires that the wrangler already had and wrote them down. The speedo, gas gauge, and fuel pump all are different from cherokee to wrangler so this was addressed. I then spliced all the corresponding wires and we'll see if she starts next week. If anyone wants detailed information on which wires I spliced and what not I can post it on request.
Here is the 2.5L harness

Here is the more of the wrangler harness

Here is a small part of the splicing

Here is what I absolutely knew I didn't need. After it cranks I will end up cleaing up the wiring a little more.
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 06-10-2011, 10:53 PM   #8
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
The engine came out of a wrecked cherokee that I knew ran. What I didn't know was it had a hole in the oil pan from the wreck. After removing the oil pan to replace it I also found out that the hole was right where the oil pump was and it was destroyed. So I ended up replacing the oil pan with a spare one i had sitting around and ended up putting a high volume Melling oil pump in place of the destroyed one.
Here is a pic of the engine on the stand

I rolled the engine on it's side for easier removal and installation of the oil pan/pump

Here is a pic of the hole in the oil pan.

Here is the chuck missing out of the oil pump. I thought it was a piece of a rod bearing before I saw the oil pump.


The engine had been started with it like that and it broke the teeth off the top of the oil pump that attached to the distributor.
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 06-10-2011, 10:55 PM   #9
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
Something I forgot to mention earlier. I am using a 91 wiring harness and computer so it all lines up with my OBD1 wiring in the rest of the jeep. I had to swap all of the sensors over to make it work with the older OBDI computer.
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 06-10-2011, 11:04 PM   #10
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
The reason I am using a different model cherokee transmission than engine is the donor cherokee had an automatic and I got from the flywheel back from a different cherokee because I wanted a manual. One thing I did not know till now is that they changed the pilot bearings. 91 back is different than 92 forward. So my pilot bearing that came with my new clutch kit doesn't fit the 97 crank, it is too big. So I had to have a machine shop mill the outside down some. If you are doing this swap you can order the correct bearing from Novak but for time's sake I just had a machine shop do mine.
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 11-11-2011, 11:11 AM   #11
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
I finally decided to finish this write up. I ended up not using the wiring harness I had made due to some issues with the lights. What I finally did do was take my 4 cylinder wiring harness and splicing in the extra two injectors. I found this ECU pinout which made this possible. The only difference in ECU pinouts between the 4cylinder and the 6 is the two extra injectors
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 11-11-2011, 11:20 AM   #12
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
After I got it all wired up correctly the thing still wouldn't start It was firing at some crazy times. It would spark erratically for the coil to the dist. but because of the odd timing it wasn't making it through the cap to the plugs. So after a little research I found out that I had the incorrect flywheel in the jeep. They changed the flywheel design. 87-90 had a flywheel with a lot of teeth for the crank position sensor to read and the 91-? had three sets of 4 teeth. So since I was using a 92 computer and electronics the flywheel was throwing the computer completely off. When I got the correct flywheel in it fixed all of these problems.
Here is the 87-90 flywheel.

Here is the 91-? flywheel

Here are the two side by side
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 11-16-2011, 06:24 PM   #13
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
I also had issues with the clutch not disengaging when I pushed in the clutch pedal. I fought with that for a long time until I finally realized that Autozone had either sold me the wrong pressure plate or that they changed the pressure plates between the years. After having the transmission out 4 times I finally just put the old pressure plate in the jeep and everything worked perfect.
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 01-16-2012, 06:30 PM   #14
Newb
 
Join Date: Jan 2012
Posts: 2
i have a trouble with my 4.0 swap!!

hi ... i have a jeep yj 1995 2.5 L and i swap to a 4.0 ho yj 1991 .. i take my 2.5 engine harness and i splice to add two wires in main harness for the two additional injector.. i put the yj 1991 4.0 computer .. plug all connector on engine and tranny and when i turn the key to on the check engine light is not on my dash light... the fuel pump dont run at on position or engine start... and i dont have fire... i use the crank sensor of my 2.5 yj 95 with ax-5 on my 4.0 yj 91 with ax-15 its ok ?? the engine harness are the same for 95 and 91 ??
vachondave is offline   Quote Quick Reply
Old 01-16-2012, 09:02 PM   #15
Jeeper
 
The Yeti's Avatar
 
Join Date: Dec 2009
Location: East Tennessee
Posts: 208
I used my 2.5L crank position sensor for my 4.0L and it worked fine. Are your grounds hooked up? The wiring harness comes through the dash in two places did one of them come unplugged? Are all of your fuses and relays good?
__________________
For Sale: 94 YJ 4.0L 5 speed swapped in place of 2.5L, SOA with 8.8 LSD, 33x12.50 Mudstars, SYE/cherokee shaft shortened, Smittybilt bumpers with 8000 xrc winch, ARB safari snorkel, Cobra CB with 8 1/2' stainless steel whip
a bunch of other junk.http://www.wranglerforum.com/f14/94-...ed-136739.html
The Yeti is offline   Quote Quick Reply
Old 01-16-2012, 10:30 PM   #16
Jeeper
 
guardian262's Avatar
 
Join Date: Oct 2011
Location: Baltic, CT for the time being.
Posts: 89
Dave...Normally not having the Check Engine Light or fuel pump activate when first turning the key is a symptom of a bad computer.

It could be that something got crossed in the swap. Did the 4.0 computer come with the motor and did you see it run before dropping it in place of the 2.5?
guardian262 is offline   Quote Quick Reply
Old 01-20-2012, 04:24 PM   #17
Newb
 
Join Date: Jan 2012
Posts: 2
hi

i not view the engine run beacuse its not the same guy sold me the engine and the computer .. the harness have a date link connector on left side of firewall .. the connector is ok ... and i have one harness go into dash for rpm oile presure and tachometer and it is connected ... the engine computer for the 91 and the 95 jeep yj are the same ??
vachondave is offline   Quote Quick Reply
Old 08-26-2012, 11:10 PM   #18
Jeeper
 
88irocz's Avatar
 
Join Date: Oct 2011
Posts: 105
Images: 20
I see its been a while but hows things going with your swap?
88irocz is offline   Quote Quick Reply
Old 08-27-2012, 03:21 PM   #19
Jeeper
 
tnjeeprider's Avatar
 
Join Date: Feb 2011
Location: Maryville, TN
Posts: 428
Hey Yeti, where are you at in East TN? I am in Maryille, south of Knoxville. What did you have to do for motor mounts. I heard that there is a kit that allows the 2.5 mounts to be used for a 4.0 but have not found any info on them. If anybody knows if such a kit exsists please PM me with info. Thanks.

tnjeeprider is offline   Quote Quick Reply
Reply

Tags
4.0l swap , engine swap

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie to forum needs help diagnosing steering issue RockyWrangler98 TJ General Discussion Forum 10 06-05-2011 08:03 PM
2.5L to 4.0L swap scuba916 TJ General Discussion Forum 26 04-29-2011 06:44 PM
Engine Swap 2.5L to 4.0L TideWrangler General Jeep Discussion 2 02-26-2010 04:02 PM
intresting info on the 4.0L TB swap... foxinthemudd General Jeep Discussion 10 03-10-2008 11:37 PM
2.5L to 4.0L Engine Swap DustyJeep YJ Tech Forum 2 01-09-2007 04:44 PM



» Featured Product

All times are GMT -5. The time now is 01:06 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC